----- Original Message -----
From: davidwjones
To: Alex ; healeys@autox.team.net
Sent: Sunday, August 29, 2004 10:22 PM
Subject: Re: Spanner goblin and clutch hydraulics
Alex,
Why permanently seal it? Just stuff one of your wife's big fluffy terry-cloth
bath towels in there when you are working around there. I find that it makes
the spouse feel like she is "participating" -they love that.. -Oh, and don't
forget to duck!
One of those telescoping wands with a magnet on the end works better than a
hanger, but not much.
David W. Jones
'62 Mk II BT7 tricarb
Cumberland, RI USA
----- Original Message -----
From: Alex
To: Healeys (E-mail)
Sent: Sunday, August 29, 2004 9:55 PM
Subject: Spanner goblin and clutch hydraulics
After three hours of wrench fiddling tonight after supper, my brand new
clutch master cylinder is installed in the Blue Mainie. Worked from the top
and from underneath the car.
Loosening the hydraulic I/O lines was easy, except for the output line to
the slave cylinder. That nut came loose, but there was some stiction
between
the steel line and the nut. Successive tightening and loosening with the
help of some loose juice helped. I was thankful that the steel tubing
wasn't
permanently rusted to the nut (yuk!)
I've got the parts to rebuild the clutch slave cylinder here, but it works
okay, and I'm trying to decide whether to abide by the "if it works don't
fix it" axiom, or the "preventative maintenance/do it now while you're
working on the system" approach. The car is up on ramps in the garage.
Although I faithfully read the viewpoints and experiences on this
reflector,
I totally forgot to heed the admonitions about the spanner goblin.
Naturally, it gobbled my best 1/2-in wrench---whoosh! --- into the tunnel
projecting up from the frame towards the carburetors it went!
It took me almost 25 minutes of fishing with a piece of coat hanger wire to
get it out (and, of course, the open end was pointing up and the closed box
wrench end was pointing down in there---just to make it more challenging to
snag).
What might be a good way to permanently seal the mouth of the goblin?
== Alex in Maine
1960 BT7 "Blue Mainie"
Former owner 1957 100-6, 1967 BJ8
Amateur Radio AI2Q
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|