Jack,
Why not add a 1/2 inch spacer between the block and filter head to move the
assembly out. This allows use of a larger filter. I got a rt angle spin on
filter piece many years ago and did that. My filter is 5 or so inches long and
hangs like you describe.
Keith Pennell
> Using the stock threaded holes and bolts, I turned the
> filter head over (180 deg.) where it points down and a bit forward and I
> used the shorter Sprite filter can and Sprite filter insert. This was
> needed to clear the engine mount tower as the 29E filter can is too long
> for this position.
> Jack
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|