I also use Delta Cam in Tacoma, WA. They are very knowledgeable about
Austin Healey cams, and have a number of grinds to choose from. Their
pricing is very reasonable, and the turn-around time is also very good.
They have done four cams and sets of tappets for me. I don't race, just
wanted something a little better than stock.
John Snyder
> I used Delta Camshaft of Tacoma Washington, my cam was complete trash and
they were able to repair and gave me the exact grind that I wanted. Compared
to buying a new cam outright it was about 20% of what a new cam
would cost. I rebuilt my engine around the cam and am happy that I did. I
went with a 3/4 race and I have found it to be very streetable, where as a
full race would have been too much for my needs. A friend recommended this
company to me when I was getting ready to drop some big bucks on a new cam
and I was very happy with the work done and saved a bunch of dollars. I
would recommend a hotter cam than stock, but I love that kick when the cam
comes on at 3000rpm.
> Don
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|