Patton -
You want to use a brass nut to keep from breaking the
stud off later, when you have to undo it. Anything on
or around the exhaust manifold should use a brass nut
for this reason (trust me on this!). Using a little
anti-seize compound is a good idea also.
Regards,
Alan
'53 BN1 '64 BJ8
--- Patton Dickson <kpdii@earthlink.net> wrote:
> I was going to install the heat shield on my BN4 and
> the car only came with
> one brass nut to mount it with. Will stainless work
> OK, or do the seize?
>
> Patton
>
> Patton Dickson - Richmond, TX
> '57 A-H 100-Six - http://Austin-Healeys.com
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|