Alain,
With the radiator in place it was not really possible to get an accurate
distance between the pump pulley and the frame cross members, and since I
doubted that your radiator is in, I didn't take the pulley to radiator
measurement. However, the distance from the rear edge of the valve cover
lip to the firewall was 1 7/8 inches or 4.5 cm. (That was to the metal of
the firewall, not to the asbestos heat shield).
"Your mileage may vary"
Dave Jones
'62 BT7 tricarb
----- Original Message -----
From: "Alain Giguhre" <agig@sympatico.ca>
To: "davidwjones" <davidwjones@cox.net>
Sent: Sunday, July 18, 2004 9:54 AM
Subject: Re: Engine / Driveshaftclearances
>Provided that no one has posted an answer before then, I'll go out to the
>garage and measure it in the AM.. My car is a BT7, But I'm pretty sure
they
>are the same, firewall forward...
>
Thanks, just curious to see if I'm in the ball park....
>9094 1154 Quibec Inc.
>(514) 385-1186
>(514) 914-2419
>agig@sympatico.ca
--
Alain Giguere
BN7 Bits
|