i drilled two (2) 1/2" holes in the lower front flange of each rear fender and
three (3) same size holes in the rear flange of the fender -- also inthe front
fender flanges, to serve as drain holes. in this manner, each time you wash
the car you can flush all the dogleg areas and eliminate any standing debris.
James Lea wrote:
>
> At the bottom front of the rear wheel arches on my BT7 there is a slot between
> the outer fender and the inner body panel that looks like it was designed to
> catch debris. As of now it is clean but I am wondering if it should be sealed
> with black body sealer and painted or left open to the air so it can dry? If
> it is left open there is no way to keep stuff from collecting in there and
> causing moisture to stand. Thanks for any advice. cheers, JL
>
> James Lea
> Rockport Maine
> 1962 BT7 II
|