Hi Wes,
You are using the original G.Analyst software with your
G.Analyst? Yikes!
You can make GEEZ accept your G.Analyst as it's primary
input device, and download directly to GEEZ from your
G.Analyst. Go to Setup | Program Options | Device, and set
the Standard Input Device to "G.Analyst". After you do
that, anytime you go to the File menu and click on Record
you'll get a "Download G.Analyst" dialog, which will handle
the download for you. It works pretty much like the old
G.Analyst software, so it should be pretty easy for you.
The problem with the old G.Analyst software is that it
required direct manipulation of the ports from DOS, and
Windows isn't particularly friendly with that approach. Our
software handles it correctly.
Also, if you need it, I have a free G.Analyst program I can
e-mail you which will download from the G.Analyst directly,
outside of GEEZ. But if you are using GEEZ anyway, you
shouldn't need it...just follow the above.
--Byron
Wes Shew wrote:
>
> I'm still using my G-analyst to record data. But now I'm having problems
> getting my 486SX33 laptop to accept the download data. G-analyst software
> program says serial port status disabled. This has happened quite often
> before and after 20+ tries it usually works, but now it won't. Tried cold
> and warm boot, reconnecting all cables. If I unplug the cable from laptop
> to base unit and unplug/plug a few times, serial port status says Com 1
> synchronizing, then 30 seconds later its back to disabled status.
>
> Else can I download from G-analyst to Geez! program? If so, how? TIA
>
> --
> Yours in motorsport, Wesley E. Shew [ macher ;-) ]
> #99 AS 1991 PORSCHE 944 S2 cpe 3.0L(M030&LSD)Indischrot/Schwarz Kunstleder
> #53 FSP 1980 VW Scirocco Mk.I, 1.6L bal.& blueprt, Platinum Grey Metallic
> SCCA (NWR) & PCA (CWR) Vancouver, Canada (604)677-1944 schumi@vcn.bc.ca
|