I like the Speedsters for my TR3. 185/65. CSRG allows a 60 series and a 205/60
will fit on the TR3, but they are close. I had to relieve/grind the leaf
springs for Yokohama 048s (radial) to fit and I rolled the fender lip too. I
found that the tires rubbed the springs in turns with only 1/4 to 3/8" static
clearance before grinding the springs.
Keep in mind that different tires may and usually do, require camber
adjustments. I didn't change mine for the Yokos which was probably needed for
best results.
The 185 Speedsters (semi-radial) rub the rolled fender slightly on one side.
The fender should be pulled out a little there, the other side is fine.
I use the Hoosier Vintage TDs (bias-ply) for the Rolex race, they are 5.50x15.
Dave H.
> On June 19, 2019 at 8:44 AM Todd Redmond via Fot <fot@autox.team.net> wrote:
>
>
> Friends,
>
>
> For the racing TR3's, what size Hoosier are you guys running? I have a
> useable old set of 185 65 SR15.
> But was curious what other sizes are being used.
>
>
> Thanks
> Todd
>
>
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/dlhogye@comcast.net
>
>
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/mharc@autox.team.net
|