They do
Sent from my iPhone
> On Sep 7, 2018, at 10:02 AM, Tony Drews <tony at tonydrews.com> wrote:
>
> Do the oil feed holes in the cam bearings line up with the oil passages in
> the block?
>
> Regards, Tony Drews
>
>> On 9/5/2018 7:56 PM, don--- via Fot wrote:
>> All,
>> I have a 1296cc Spitfire motor with maybe 25 hours on it.
>> 2 race weekends for sure and some tuning hours.
>> Anyway, for other reasons I had to tear it down and I noticed
>> the fresh cam bearings had grooves worn on the six o?clock area.
>>
>> Seems a bit of premature wear to me.
>> What might cause this?
>> Spring Pressures too high?
>>
>> Thanks in advance,
>> Don
>>
>>
>>
>> DON COUCH PHOTOGRAPHY
>> www.dcphotos.com
>> (512)-680-3540
>>
>>
>>
>> _______________________________________________
>> fot at autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/fot
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tony at
>> tonydrews.com
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20180907/5699c4d4/attachment.html>
|