All of our FIA race cars are running legal 87mm engines.
Just rolling roaded the latest SLR build at well north of 200bhp
Thomas Boyd
Director
TR Enterprises
01623 793807 (ext 302)
www.trenterprises.com
> On 1 Sep 2018, at 17:02, John Styduhar via Fot <fot at autox.team.net> wrote:
>
> If you really had serious compliance with most group's rules, I would guess
> half the TR cars would not pass muster. Let's have fun together.
>
>
>> On Sat, Sep 1, 2018 at 9:40 AM Terry Stetler via Fot <fot at autox.team.net>
>> wrote:
>> Indeed there are Glen.
>>
>>
>>
>> Sent from Mail for Windows 10
>>
>>
>>
>> From: Fot <fot-bounces at autox.team.net> on behalf of fubog1 via Fot <fot
>> at autox.team.net>
>> Sent: Saturday, September 1, 2018 7:34:26 AM
>> To: rkramer56 at gmail.com
>> Cc: fot at autox.team.net
>> Subject: Re: [Fot] 89MM piston question
>>
>> everybody else seems to be using 89.
>> HaHa not everybody, rules say 87mm, there are still a few guys running them
>> (and winning)...
>> Glen
>>
>>
>>
>> -----Original Message-----
>> From: Bob Kramer via Fot <fot at autox.team.net>
>> To: van.mulders.marcel <van.mulders.marcel at telenet.be>
>> Cc: fot <fot at autox.team.net>
>> Sent: Fri, Aug 31, 2018 11:26 pm
>> Subject: Re: [Fot] 89MM piston question
>>
>> I've always used 87 MM due to the rules but everybody else seems to be using
>> 89. The procedures are the same so It'll be the same. I blew a head gasket
>> last time out, compression into the cooling system and blew off the bottom
>> hose. I guess it wasn't tight enough, and scuffed two pistons before I could
>> shut it down.
>>
>> Bob Kramer
>>
>> On Fri, Aug 31, 2018 at 12:43 PM, <van.mulders.marcel at telenet.be> wrote:
>> Bob,
>> It is definitely necessary to make that modification to the liners. The
>> relieve should correspond to the shape of the combustion chambers : about 4
>> mm wide on a 89mm engine.
>> Marcel
>>
>> Van: "fot" <fot at autox.team.net>
>> Cc: "fot" <fot at autox.team.net>
>> Verzonden: Donderdag 30 augustus 2018 00:05:43
>> Onderwerp: [Fot] 89MM piston question
>>
>> Do the guys running the 89MM pistons and liners need to relieve the liners
>> to clear the intake valve, or does the extra MM make the difference?
>>
>> Bob Kramer
>>
>> On Tue,
>>
>> _______________________________________________
>> fot at autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/fot
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/fot/van.mulders.marcel at telenet.be
>>
>> _______________________________________________
>> fot at autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/fot
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/fubog1 at
>> aol.com
>>
>>
>> _______________________________________________
>> fot at autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/fot
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/johnstydo at
>> gmail.com
>>
>>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tom at
> trenterprises.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20180901/c0d7aee5/attachment.html>
|