fot
[Top] [All Lists]

[Fot] Race Seat

Subject: [Fot] Race Seat
From: vfracing at aol.com (vfracing at aol.com)
Date: Mon, 13 Aug 2018 14:09:43 -0400
References: <49430bff.a366.16533642a17.Webtop.48@optonline.net>
Todd;
I use a Cobra Suzuka seat in my TR4A.  Very comfortable and good support.  Took 
a lot of doing and building the cage around the seat to make it fit.


I tried the Cobra "Vintage" seat as it fit much better in the car, but was too 
narrow for my butt (34 waist).


My son uses an "Upright" Kirkey, leaned back a bit) in his '62 TR4.  It's Ok 
but an upgrade is on his "to do" list.


Two things we learned when selecting seats:


1) FIA seats approved for installation with no back support REQUIRE that the 
mounts supplied by the manufacturer be used in order to not use a back support.


2) After five years, any FIA seat requires a back support whether or not it is 
approved without a back support when new.


So it is best to plan on adding a back support to the seat regardless of 
rating. (We supported my seat directly from the roll cage on one side) and 
added a back support.


Phil Gott
'65 TR4A racer (HRG group 3)


vfracing at aol.com




-----Original Message-----
From: Todd Redmond via Fot <fot at autox.team.net>
To: FOT at autox.team.net FOT at autox.team.net <FOT at autox.team.net>
Sent: Mon, Aug 13, 2018 10:07 am
Subject: [Fot] Race Seat

Friends!I'm looking for recommendations for a race seat for the TR3.   What are 
you using?ThanksTodd Redmond1958 
TR3a_______________________________________________fot at 
autox.team.nethttp://www.fot-racing.comDonate: 
http://www.team.net/donate.htmlArchive: 
http://www.team.net/pipermail/fotUnsubscribe/Manage: 
http://autox.team.net/mailman/options/fot/vfracing at aol.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/fot/attachments/20180813/90718dbc/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>