Looking for some help from the wisdom of the FOT List.
I have rebuilt a number of Triumph A-type overdrive transmissions in the
last few months but have one that is giving me problems.
The overdrive functions OK when applied and will go into overdrive at a
steady cruising speed.
The problem is when under load accelerating up a hill or to pick up speed
it softly drops out. When you lift throttle it will go back in.
We put a 500 psi gauge on the operating valve thinking we were losing oil
pressure when it drops out of overdrive. Gauge reading shows a pretty
steady 340 psi reading. When it drops out the gauge doesn't drop out but
remains steady.
340 psi is lower than the expected 400 - 500psi. Does that indicate oil
pump replacement is necessary? The engine rpm was approximately 2500-3000
rpm.
Since it softly drops out of overdrive I'm thinking a slipping overrunning
clutch??
Any advice would be greatly appreciated.
Thanks in advance
Glenn Franco
74 TR6 , TR250, MG TC, BMW e10 2002
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20180801/f5205ef3/attachment.html>
|