Yes it works well.
Glen
-----Original Message-----
From: Mike Harmuth via Fot <fot at autox.team.net>
To: FoTTriumph <fot at autox.team.net>
Sent: Wed, Nov 8, 2017 5:45 pm
Subject: [Fot] Triumph Spitfire big valve head questions
Does anyone have experience using this head on a 1296 small journal block? It
looks like it needs to be milled down to raise the compression ratio but will
if flow better than a Kastner book prepped 1.38" intake valve "stock" head? I
know bigger isn't always better when it comes to flow. I'm using Stahl headers
and a 2 1/4" exhaust so I don't think I'm going to run into flow restriction
downstream with this.
https://www.bpnorthwest.com/triumph/spitfire/engine-cylinder-head/cylinder-head-big-valve-new-spitfire-1300-1500-midget-1500.html
thanks
mike h
Virus-free. www.avg.com
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20171109/3cb1d02f/attachment.html>
|