Ed, I have done the clutch conversion. Any good machine shop can redrill the
new holes n the correct spot.
John Rowe
Qld Australia
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Ed O'Neal
Sent: Saturday, 1 July 2017 1:21 AM
To: healeys at autox.team.net
Subject: [Healeys] Toyota 5 speed
Gents,
I'm going to do the Toyota 5 speed conversion on my 1960 BT7. Apparently, I
will need a BJ8 flywheel. Can the old BT7 flywheel be successfully
re-machined to accept the BJ8 clutch plate? If so are there any
instructions for this modification?
Ed O'Neal
ed at wadsworthoneal.com
Edward J. O'Neal, P.E., Pte.
Wadsworth O'Neal Associates, Inc.
6418 Commerce Park Drive
Fort Myers, Florida 33966
phone: (239) 245-8728
cell: (239) 410-6174
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170701/3b0a16c1/attachment.html>
|