Richard,
It is highly unusual to mix pistons types in an engine. I trust you are
getting good advise from a reputable engine builder.
Harold
_____
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Richard
Pratt
Sent: Tuesday, June 27, 2017 11:21 AM
To: healeys at autox.team.net
Subject: [Healeys] BJ8 Piston
I am in need of one BJ8 piston-0.020" over size. With or without rings
usual suspect will not break up a set.
Any help would be appreciated.
Richard
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170627/905dd9c4/attachment.html>
|