[Healeys] cable

[jmsdarch at sbcglobal.net (John Spaur)]

They would damage the speedo bearing which freeze and cause the angle drive to 
break. Angle drives can be repaired by removing the metal disks and shaping a 
short piece of speedo cable to replace the broken one.

 

John Spaur

 

From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob 
Spidell
Sent: Monday, May 29, 2017 6:47 AM
To: healeys at autox.team.net
Subject: Re: [Healeys] cable

There were some defective cables going around a few years ago but, IIRC, they 
were a bit too long at the speedo end and damaged the speedo.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170529/06de0287/attachment.html>