fot
[Top] [All Lists]

[Healeys] Selecting a replacement CAM for BJ8

Subject: [Healeys] Selecting a replacement CAM for BJ8
From: steveg at abrazosdata.com (Steve B. Gerow)
Date: Sat, 15 Apr 2017 11:51:36 -0800
By mid-summer I should be able to report back.

My engine will be:
DWR8 278 degree cam w stock lifters & pushrods
.060" over 9:1 Venolia lightweight forged pistons (approx 3.1L displacement)
HD8 carbs on DMD manifold
Kirk headers thru stock Burgess muffler into Monza tailpipe
Stock head with intake port matching
DWR high-flow oil pump
Lightened flywheel with BJ8 diaphragm clutch into Toyota Supra 5-speed; 3.54 
axle.

This'll be on a stock 29D which had never been overhauled - stock crank & bores.

According to DW's spec sheet, the DWR8 cam only gives up a little low end 
torque.

-- 
Steve Gerow
Altadena, CA
BN6 29D
Maker of Most Complete Big Healey Rear Disc Kit

<Prev in Thread] Current Thread [Next in Thread>
  • [Healeys] Selecting a replacement CAM for BJ8, Steve B. Gerow <=