Hang on there Simon... we are talking about a flasher unit... your little round
can with 3 terminals...... and the relay... with 8 terminals.
So, in your case the flasher unit is working fine however, there seems to be a
problem with the relay because when LHS is called for the contacts for both the
front and rear bulbs close but, for the other side probably only one pair of
contacts are closing.
This can be determined by observing which, i.e. front or rear, bulb is lighting.
The "relay" probably needs adjustment.
This is a littie like brain surgery... takes a little practice.
Best of luck.
Michael S
BN1 #174
From: Simon Lachlan
Sent: Tuesday, February 14, 9:11 PM
Subject: [Healeys] Flasher relay advice please
To: Healey List
Cc: Pierre Henri Claret
BJ8 with combined side/indicators/brake lights. NOT the late phase II with the
extra lights.
So,?the relay. By this I mean the round silver can with 1 wire from P to the
dash, 1 from B to the 35 amp feed & 1 from L to T8 on the dreaded 8-way flasher
relay box.
Now, the LHS indicators work and the RHS don?t. Well, they?ve worked
occasionally. My question is this:-
If one side works, then the relay works?? There?s no way that the relay can
function on one side only? It sends current down one wire only, so, if the LHS
works, then the relay is doing its job????? Right?????
?
I remain very prepared to be confounded. My logic(?) usually fails when I?m in
front of a wiring diagram. In fact, I would be thrilled just to be able to fix
the problem with a cheap part.
Thanks,
Simon
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170214/42f11c7c/attachment.html>
|