Mike,
Take a look at where I mounted my Halda Speedpilot:
http://s81.photobucket.com/user/healeyrick/media/IMG_0324_zpsdc963f63.jpg.html?sort=3&o=255
It fits into an "L" shaped bracket that is secured by the two screws that
hold the air controls to the bottom of the dash. You could make up a panel
to fit your switches in the same fashion and maybe cover it with the same
material as your dash. Holden has a nice push button horn switch that
would be easier to activate than a toggle:
https://www.holden.co.uk/displayproduct.asp?sg=1&pgCode=020&sgName=Electrical&pgName=Switches&agCode=0517&agName=Horn+%26+Dip+Switches&pCode=SPB160
Look around on their website, they have just about any switch you could
want for an LBC
Happy Healeying,
Rick Neville
On Fri, Feb 3, 2017 at 5:07 PM, Mike Tobin <ahbt71 at gmail.com> wrote:
> Hey Y'all,
> About ready to install and wire the dash on the BT7 and looking for ideas
> on how to add a couple switches without cutting any holes in the dash.
> I'll be installing a DW safety steering column which has no stator tube so
> I need homes for the indicators and the horn. Thinking a two position
> switch and a momentary switch.
> Thanks and Cheers,
> Mike Tobin
> Townsend, Montana
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/healeyrik at gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170204/ccb83501/attachment.html>
|
