These are very light springs.
I would run 250 seat pressure and 500 at full lift.
Cheers
Chris
Von: Fot [mailto:fot-bounces at autox.team.net] Im Auftrag von timmmurphh---
via Fot
Gesendet: Dienstag, 14. Februar 2017 20:56
An: fot at autox.team.net
Betreff: [Fot] valve spring pressure on TR4 race engine
I have 85 lbs. pressure on the intake valve with the valve closed and it
sits at a height of 1.655 inches. At .400 lift, I have 190 lbs. of
pressure. We only run to 6000 RPM with the gearing we have and the engine
we have. The valve springs are double springs and the machine shop says
they are all about the same, very consistent. What pressures would be
recommended? The machine shop thinks these pressures are light for a 6000
RPM engine. Any advice will be appreciated. Thanks.
Tim Murphy
1961 TR4 #317 BRG
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20170214/fbb79896/attachment.html>
|