fot
[Top] [All Lists]

Re: [Fot] Tr6 roller rockers & lifters

To: Tony Drews <tony@tonydrews.com>
Subject: Re: [Fot] Tr6 roller rockers & lifters
From: Bob Bownes -Seiri <bownes@seiri.com>
Date: Thu, 14 Jul 2016 04:54:21 -0400
Cc: "fot@autox.team.net" <fot@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
References: <17BEC883-24B0-401D-908C-BAB1F203C553@seiri.com> <20160714043914.5356320EC8@relay.mailchannels.net>
Thanks Tony. I'm educated once again. 

> On Jul 14, 2016, at 00:39, Tony Drews <tony@tonydrews.com> wrote:
> 
> Roller lifters need a different cam profile than flat ones.  So not only 
> would you need to find some that could work, you'd need a custom cam grind 
> that works with them too.
> 
> Regards, Tony D
> 
> At 01:28 PM 7/13/2016, Bob Bownes -Seiri wrote:
> 
>> Before I call up Richard Good and ask him to send me a set of roller rockers 
>> and pushrods, I presume no one has a set languishing in a box in need of a 
>> home do they?
>> 
>> Ah well. I suspected as not. :)
>> 
>> On the other end of the pushrods, has anyone ever looked at doing roller 
>> lifters? There are certainly plenty to be had in every V8 size known to man. 
>> Surely one has to be a close enough fit to be able to make work...
>> 
>> Bob
>> 
>> _______________________________________________
>> fot@autox.team.net
>> 
>> http://www.fot-racing.com
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: 
>> http://autox.team.net/mailman/options/fot/tony@tonydrews.com
> 
> 
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>