fot
[Top] [All Lists]

Re: [Fot] TR4 TR6 quick rack

To: "<fot@autox.team.net>" <fot@autox.team.net>
Subject: Re: [Fot] TR4 TR6 quick rack
From: "Barr, Scott" <sbarr@McCarty-Law.com>
Date: Mon, 9 Nov 2015 20:07:52 +0000
Accept-language: en-US
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
References: <22359.1447052641@mitchelplumbing.com> <DUB405-EAS20C73FC782FCDE6B6A113BC8150@phx.gbl>
Thread-index: AQHRGr5O67bpxTMAKE6C0kHXihNih56UfrYA//+dJ/A=
Thread-topic: [Fot] TR4 TR6 quick rack
The designation of a steering rack as "not suitable for racing" but otherwise 
suitable for general use is absurd.  I, for one, would MUCH rather have my 
steering fail while driving at 60-85 mph around Blackhawk Farms Raceway than 
while driving 55 mph down some public road.  At least at Blackhawk I'd stand a 
pretty good chance of running into a tire barrier instead of into a crowd of 
people or parked car or a stand of maple trees.

I understand from a prior post on this thread that Moss is saying that they 
have resolved the issue with the defective racks.  But any kind of disclaimer 
that a component like this is fine for street use but unsuitable for racing is 
absurd.  My personal injury practice partners would have a  field day with that.

Scott



-----Original Message-----
From: Fot [mailto:fot-bounces@autox.team.net] On Behalf Of Tony Sheach
Sent: Monday, November 09, 2015 1:50 PM
To: charly@mitchelplumbing.com
Cc: <fot@autox.team.net> <fot@autox.team.net>
Subject: Re: [Fot] TR4 TR6 quick rack

Charly

There were a large number of failures of these racks in the UK on both road and 
competition cars. For MOSS to say that there was only one is simply untrue.

I personally had TWO failures of brand new racks about 18 months apart. Both of 
these failures involved the pinion housing separating from the rack tube at 
high speed in very dangerous circumstances.

I would NOT recommend the use of a MOSS rack to anyone, whether for road or 
competition use because the manufacturing quality is poor and the material 
quality is similarly inadequate. The information that I was given at a meeting 
face to face with MOSS in london have me the impression that some testing had 
been done, but the solution to the problem really had not been found (ie do the 
job properly).

I now use a custom made rack which has a single piece pinion housing and rack 
tube made from billet aluminium. These are being made in the UK. I will never 
use a steering rack supplied by MOSS again. 

Regards

Tony 

Sent from my iPhone

> On 9 Nov 2015, at 07:04, Charly <charly@mitchelplumbing.com> wrote:
> 
> Friends,
> 
> I have a friend wanting to buy a quick steering rack for his TR4A.  I 
> told him there was a problem with them, but I thought it was resolved.  I 
> searched the archives and could find anything about it.  Does someone in the 
> group know the outcome of the problems that were brought to Moss on these 
> quick racks?
> Thanks,
> Charly Mitchel
> Tr6 #44
> 
> _______________________________________________
> fot@autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/fot/tr4.tony@virgin.net
> 
> 
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive


_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>