Rich, how much did you have the head milled down?
On Tue, Dec 23, 2014 at 4:51 PM, Rich <rikrock@live.com> wrote:
> This is not the "usual" situation. There are two cracks which have grown
> to
> the point they are on the edge of the sealing area.
>
> I can send a picture...
>
> Rich Rock
> ________________________________
> From: Tony Drews
> Sent: 12/23/2014 11:44 AM
> To: SpiwakD@aol.com; fot@autox.team.net
> Cc: rikrock@aol.com
> Subject: Re: [Fot] TR head cracks
>
> Crack between the two water passages between 2 and 3 is common and
> can be ignored. It's not a sealing surface.
>
> Cheers, Tony Drews
>
> At 07:30 AM 12/23/2014, SpiwakD@aol.com wrote:
> >I need advice on repairing some cracks on a TR4 head between #2 and 3
> >cylinders. Is it common and is it a real concern? Can it be repaired?
> >_______________________________________________
> >fot@autox.team.net
> >
> >http://www.fot-racing.com
> >
> >Donate: http://www.team.net/donate.html
> >Archive: http://www.team.net/archive
> >Forums: http://www.team.net/forums
> >Unsubscribe/Manage:
> >http://autox.team.net/mailman/options/fot/tony@tonydrews.com
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/rikrock@live.com
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/johnstydo@gmail.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|