Don,
H6 carbs are too long to use on the long manifold unless you want to push
in the inner fender.
All H carbs are the same length. HS carbs (horizonal short) go with the
long manifold.
The only difference between late and early H carbs is the float bowl top
and banjo fittings as far as I know.
Bruce
On Mon, Dec 15, 2014 at 3:32 PM, TR4 Tony <tr4.tony@virgin.net> wrote:
>
> Don
>
> I believe that the version available is based on the TR7 carb - they have
> an
> extra bleed hole and a few other differences as I recall.
>
> there is a guy called andrew turner who sells reconditioned carbs on eBay.
> He
> might also be worth talking to.
>
> Regards
> Tony
>
> Sent from my iPhone
>
> > On 15 Dec 2014, at 19:15, Don Marshall <dmar823@gmail.com> wrote:
> >
> > Are all H6 carbs the same? The Moss catalog shows 2 different numbers
> for
> > them, depending on whether its early TR3 or later TR3/early TR4.
> Assuming
> > they'll be used with a late TR4A long intake manifold, does the version
> of
> > the H6 matter?
> > _______________________________________________
> > fot@autox.team.net
> >
> > http://www.fot-racing.com
> >
> > Donate: http://www.team.net/donate.html
> > Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
> > Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/tr4.tony@virgin.net
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/stutztr4@gmail.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|