Thanks everybody.
Marty
Subject: Re: [Fot] TR6 crank journal dimensions
From: sjanzen@me.com
Date: Mon, 15 Dec 2014 11:21:46 -0500
CC: trmarty@hotmail.com; fot@autox.team.net
To: charly@mitchelplumbing.com
Charly's numbers are correct - I'm in the middle of a GT6 build - same
dimensions, and that's where they should be before grinding undersize.
On Dec 15, 2014, at 11:09 AM, Charly Mitchel wrote:
According to my manual,
Main journal diameter 2.311-2.3115"
Crankpin diameter 1.875-1.8755"
Charly Mitchel
TR6 #44
----- Original Message ----- From: "marty" <trmarty@hotmail.com>
To: "FOT" <fot@autox.team.net>
Sent: Monday, December 15, 2014 7:56 AM
Subject: [Fot] TR6 crank journal dimensions
Anybody have the dimensions handy for the TR6 crankshaft main and rod
journals? I don't seem have them at work. I found some on the internet but
think they left off a number.
Thanks,
Marty
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/charly@mitchelplumbing.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|