Do we know what the thickness of these would be? This obviously has much to
do with the static CR.
Steve Yott
-----Original Message-----
From: Fot [mailto:fot-bounces@autox.team.net] On Behalf Of John Hasty
Sent: Monday, December 01, 2014 8:50 PM
To: FOT
Cc: John Baucom
Subject: [Fot] Fwd: TR6 - Cometic MLS Head Gasket
Cometic head gaskets.....anyone interested?
Sent from my iPhone
Begin forwarded message:
Date: December 1, 2014 at 9:32:58 PM EST
Subject: Re: [Fot] TR6 - Cometic MLS Head Gasket
It requires a special die to make a MLS version which they will do but they
want a 2500-3000 dollar minimum order the first time. There is more to it
than just having the pattern, the MLS gasket has to have raised rings on all
the sealing areas of the outer two layers which is where the stamping die
comes in which has to be CNC machined. That is why they want the minimum
order the first time to cover there cost for the die then after that they
will cost the same as any other gasket. They don't charge for the die just
require selling enough gaskets up front to cover the initial cost. I think
it works out to about $100 a gasket. So if we order 28-30 it's covered.
On Monday, December 1, 2014, John Hasty
FYI
Sent from my iPhone
Begin forwarded message:
From: Peter Vucinic
s
cript:;>>>
Date: December 1, 2014 at 4:30:17 PM EST
To: 'marty'
>,
'FOT'
Subject: Re: [Fot] TR6 - Cometic MLS Head Gasket
Marty,
I've asked them if the will cut an MLS version. The already have the head
gasket pattern. SO I don't see an issue? But you never know.
Cheers..
-----Original Message-----
From: Fot [mailto:fot-bounces@autox.team.net<javascript:;>] On Behalf Of
marty
Sent: Tuesday, 2 December 2014 1:31 AM
To: FOT
Subject: Re: [Fot] TR6 - Cometic MLS Head Gasket
>From what I can tell on line it looks as though Cometic only offers copper
head gaskets for the TR6. Darn.
Marty
From:
c
ript:;>>
To:
Date: Mon, 1 Dec 2014 13:09:40 +1100
Subject: [Fot] TR6 - Cometic MLS Head Gasket
Wondering if anyone on the list has used/purchased a Cometic Multi Layer
Steel head gasket from Cometic?
Or are there other suppliers for Steel head gaskets for the TR6?
Thank you in advance
"You can Make a Small Fortune From Motor Racing. As long as You Started With
A Lage Fortune!"
Kind Regards
Peter Vucinic
TR4 - TR7 V8 - Spitfir MkII
_______________________________________________
<http://www.fot-racing.com/> http://www.fot-racing.com
Archive: <http://www.team.net/archive> http://www.team.net/archive
Forums: <http://www.team.net/forums> http://www.team.net/forums
_______________________________________________
http://www.fot-racing.com
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/trmarty@hotmail.com
_______________________________________________
http://www.fot-racing.com
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/pvucinic@netspace.net.au
_______________________________________________
http://www.fot-racing.com
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/jhasty@mhc-law.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|