Amici,
I have several of the square o-rings use in the calipers cross over
port. I could send a couple if you send a pre stamped envelope to me.
Contact off line,
Bob T
"64 SpitGT autocrosser
-----Original Message-----
From: Randall <TR3driver@ca.rr.com>
To: fot <fot@autox.team.net>
Sent: Wed,
Aug 27, 2014 12:02 pm
Subject: Re: [Fot] Caliper Rebuild
> The torques have
to be in the archives somewhere, because
> this topic has come up at least a
couple of times before,
> albeit quite a
> while ago.
I've got two posts
saved in my personal archives. Both agree on 45 ft-lb for
the 5/16" and 75
ft-lb for the 3/8". One post from
Brian Schlorff at Power British; the other
originally posted by Cliff Hansen
(reposted by John Lye) and crediting TRF
tech support
for the info.
TRF also offers the O-rings, which as I recall are
slightly rectangular in cross
section rather than square.
Randall
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive:
http://autox.team.net/mailman/options/fot/robertten1@aol.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|