Group: Earlier this year I bought a new (to me) car trailer and had to take
the TR250 that was on it. I have been selling off the parts on Ebay. In the
collection of "stuff" was a set of rockers from this company. They can best be
described as poor examples. The metal is so thin I think my welder would have
a hard time to not blow holes in it even on the lowest setting. They sell
these for $99, and I felt happy to get $25 for the pair. I am currently
putting in a set of BMH floorpans in a customers "6" and these make the others
companies product look like scrap metal.
JMHO
-Ed-
________________________________
From: "deweerdm@rogers.com"
<deweerdm@rogers.com>
To: Glenn Franco <gaf3@charter.net>
Cc:
"fot@autox.team.net" <fot@autox.team.net>
Sent: Friday, October 4, 2013 10:37
AM
Subject: Re: [Fot] Floor pans
Thanks for the great info Glenn
Robert I
hope you are talking about getting back on track at RA by welding up
the frame
in the paddock and not my turn 14 excursion .....which was very cool
too.....not sure who at RA I should bill for putting those 2 corn furrows in
...lol
Sent from my iPhone
On 2013-10-04, at 9:13 AM, Glenn Franco
<gaf3@charter.net> wrote:
> I contacted the owner of this company directly
last year. They are a local
company near Detroit, Mi
> The floor pans are soft
tooled (Big 3 engineering term for temp tools).
> The floor pans are not
comparable to the British Motor Heritage floor pans
available from the British
Parts Suppliers.
> If you have the body off, I would not recommend these as
they do not have
the ~3" downstanding flange that connects to the lower
rocker.
> There are also no holes or weld nuts for the tunnel.
> I would
consider this a patch panel to drop in rather than a factory repair
part.
>
FYI
> Glenn
>
>
> On 10/4/2013 8:25 AM, Robert M. Lang wrote:
>> The URL for
this company is:
>>
>> c2cfabrication.com
>>
>> I have no direct experience
with them (that I know of).
>>
>> Part of me wonders if they picked up the
tooling from one of the body panel
fabricators from "back in the day". The
names escape me, but I used to have a
couple of catalogs back in the 80's from
at least a couple of companies that
made panels and partial panels for pretty
much everything.
>>
>> In any case, the web site looks promising.
>>
>>
Regards,
>> rml
>>
>> p.s. nice job getting your car BACK ON TRACK at ELVF!
That was pretty kool
IMHO.
---------------------------------------------------------------------------
>>
Bob Lang Triumph TR6!! | This space for rent
>>
Former NER Solo Chair |
>> Voice:617-253-7438
| Cell: 339-927-4489
>>
---------------------------------------------------------------------------
>>
_______________________________________________
>> fot@autox.team.net
>>
>>
http://www.fot-racing.com/
>>
>> Donate: http://www.team.net/donate.html
>>
Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>>
http://autox.team.net/mailman/options/fot/gaf3@charter.net
> _______________________________________________
> fot@autox.team.net
>
>
http://www.fot-racing.com/
>
> Donate: http://www.team.net/donate.html
>
Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
http://autox.team.net/mailman/options/fot/deweerdm@rogers.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com/
Archive:
http://autox.team.net/mailman/options/fot/edwardbarnard@prodigy.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|