Ah.... We solved that problem with rubber mounts between the bowls and carb
bodies; but next time the motor is out a 3 plate and mounts will be applied
for sure.
Sent from my iPhone
On Sep 4, 2013, at 6:05 PM, Kas Kastner <kaskastner@gmail.com> wrote:
> With the TR-4 engine on the engine dyno at 5000 RPM you could not hold your
> hand on the float bowls and full throttle the vibration was so bad. That
> was the engine bolted down hard. I tried several times to reduce the froth
> in the bowl by dampening with my hand and could not hold onto the bowl at
> 5000. Take that as a clue. Did not say it would not work in real life, but
> that is a clue.
>
> *Never be beaten by equipment.*
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/jhhasty@gdhs.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|