Since two years I'm running the MGB GT springs too and they work fine.
Not too stiff. Not to forget I run 4.5 degree of camber.
-----Urspr|ngliche Nachricht-----
Von: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] Im
Auftrag von Joe Alexander
Gesendet: Samstag, 1. Juni 2013 14:50
An: Stutzmans
Cc: Triumph 'Friends of Triumph
Betreff: Re: [Fot] Sway bar
There goes those pesky variables again.
It seems that most of the TR3/TR4 vintage racers are set up in such a way
that having a rear sway bar is not a good idea.
Perhaps someone can come up with a new formula that includes a rear sway bar
that makes us handle better and faster.
Chris' set up includes lower spring rates in the front. We have run the MGB
GT springs the front since 1993, but not afraid to change. Those are about
500 lbs.
No wrong answers in this thread. Ultimately the answer lies in lots of
testing and changing all of the variables. Not an option for many of us.
We did hard mount the rear shackles with a bronze bushing kit and that is a
clear improvement over rubber bushings for both race and street cars.
Joe A
Sent from my iPad
On May 31, 2013, at 9:15 PM, "Stutzmans" <stutzmans@comcast.net> wrote:
> A bar on the rear of a TR3 usually causes the inside rear tire to lift
> on
tight turns.
> If you have a stock diff or a Quaife you may well spin.
> Bruce
> ----- Original Message ----- From: "John Hasty" <jhhasty@gdhs.com>
> To: "Triumph 'Friends of Triumph" <fot@autox.team.net>
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/tr4racing@googlemail.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|