fot
[Top] [All Lists]

Re: [Fot] brake question

To: Greg Lunker Hilyer <Lunkercars@earthlink.net>
Subject: Re: [Fot] brake question
From: Robert Deanes <rfdeanes@gmail.com>
Date: Thu, 30 May 2013 08:10:43 -0400
Cc: Friends of Triumph <fot@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
References: <E545F325-1106-4FF8-8EE0-18B467C4E391@earthlink.net> <E11ECC3A-BFA2-45B3-8F52-16EF3BC7F7DB@earthlink.net>
I run Ted's shoes also and like them , I also had a small fit problem where
I had to cut the edge of the pad to keep from scrubbing, five min. and it
fitted fine.


On Wed, May 29, 2013 at 10:44 PM, Greg "Lunker" Hilyer <
Lunkercars@earthlink.net> wrote:

> Hi Bill,
>> Common issue for me too. Most of the fined brake drums out there are 240Z
>> with a bit of machining. I just get the shoes ground to fit at my last
>> remaining ol' time brake shop. Though I haven't tried, I suspect that a
>> 240Z shoe would go right on with no fit problems - but I like Ted's shoes [
>> can't remember the name or compound].
>> Greg "Lunker" Hilyer
>> TR4 #314
>> Albuquerque New Mexico
>>
>> On May 29, 2013, at 7:31 PM, Bill Tobin wrote:
>>
>>  Hi Gang, I have a question about rear brake shoes for the rear of my TR6.
>>> For the third time, I'm replacing the rear shoes with uprated ones.
>>> For the third time, the new shoes will not accept my finned aluminum
>>> drums.
>>> With the adjusters backed completely off, the drums won't go on. Before
>>> they
>>> wouldn't accept the standard drums until I had them turned quite a bit
>>> (not a
>>> problem, the drums seem to be very thick).
>>> I talked too Porterfield and KFP over the last couple years, they both
>>> said
>>> the shoes were arced to specs. I'm now using Ted S's shoes; same problem.
>>> I'd like to run the finned drums but will not have them cut that much
>>> undersized.
>>> Any insight? Ted?
>>> Thanks, Bill
>>> PS, if you go to a brake shop and ask about arc grinding shoes, they
>>> look at
>>> you funny!
>>> ______________________________**_________________
>>> fot@autox.team.net
>>>
>>> http://www.fot-racing.com
>>>
>>> Donate: http://www.team.net/donate.**html<http://www.team.net/donate.html>
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>> Unsubscribe/Manage: http://autox.team.net/mailman/**
>>> options/fot/lunkercars@**earthlink.net<http://autox.team.net/mailman/options/fot/lunkercars@earthlink.net>
>>>
>> ______________________________**_________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.**html<http://www.team.net/donate.html>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/**
> options/fot/rfdeanes@gmail.com<http://autox.team.net/mailman/options/fot/rfdeanes@gmail.com>
>
>
>


-- 
rob deanes
TR Racer
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>