The car came to me with a UK sourced header. That's all I know about it.
Bob Kramer
Sent from my iPhone
On Apr 25, 2013, at 9:51 AM, "john hasty" <jhhasty@gdhs.com> wrote:
> The Stahl header was perfect. 3 pictures attached. I had them send the
> engine plate to me first so we could fit it to the modified head. Had them
> use 16 gage 1-5/8" tubing instead of 18 gage. It is 4 into 1. The fit of
> the primary tubes to the rectangle exhaust outlets was perfect as if they
> had been forged to shape. The primary tubes, as best I could measure, were
> exactly the same length. I had the collector welded and they used an
> additional strap around the primary tubes at the point they fit into the
> collector. I then had Airborne ceramic coat it to reduce the radiated
heat,
> they say, by 35%. The collector was close to touching the frame at one
> point and Allen made a little more clearance by modifying the frame at that
> point, but other than that no fitting problems. (Note my old header had
the
> same frame clearance problem)
>
> Bud's old header is 4 into 1 & has rust etc. but is sound and useable. I
> have no idea who made it, perhaps Bud could tell us. Cheers!
>
>
> John H. Hasty
> Attorney At Law
> Guthrie, Davis, Henderson & Staton, P.L.L.C.
> 719 East Boulevard
> Charlotte, North Carolina 28203-5113
> Tele: (704) 372-5600
> Fax: (704) 372-4601
> E-mail: jhhasty@gdhs.com
> www.gdhs.com
>
> PRIVILEGE AND CONFIDENTIALITY NOTICE: This message (and any attachments)
is
> intended only for the use of the addressee and may contain information that
> is PRIVILEGED and CONFIDENTIAL, and/or may contain ATTORNEY WORK PRODUCT.
> If you are not the intended recipient, you are hereby notified that any
> dissemination of this communication is strictly prohibited. If you have
> received this communication in error, please erase all copies of the
message
> and its attachments and notify us immediately. Thank you.
>
> IRS CIRCULAR 230 NOTICE: In order to comply with certain IRS regulations
> regarding tax advice, we inform you that, unless expressly stated
otherwise,
> any tax advice contained in this communication (including any attachments)
> is not intended or written to be used, and cannot be used, for purposes of
> (i) avoiding penalties under the Internal Revenue Code or (ii) promoting,
> marketing or recommending to another party any transaction or matter
> addressed herein.
>
>
>
> _____
>
> From: davehogye [mailto:dlhogye@comcast.net]
> Sent: Thursday, April 25, 2013 10:01 AM
> To: john hasty
> Subject: Re: [Fot] Exhaust Headers
>
>
> Hi John,
> How did the Stahl header work out? How did it fit? Any frame clearance
> issues? What is the old header like? Do you know who made it? Is it a
> 4-1, or 4-2-1?
>
>
> Dave H.
>
>
> _____
>
> From: "john hasty" <jhhasty@gdhs.com>
> To: fot@autox.team.net
> Sent: Thursday, April 25, 2013 6:33:33 AM
> Subject: [Fot] Exhaust Headers
>
> Amici: When my headers exploded at Road Atlanta, Bud kindly sent me an old
> set in case I was unable to get the New Stahl headers fit for VIR. I was
> able to get the new set on a day before we left; so, the used set is now
> available to anyone who finds themselves in a similar fix. Just let me
know
> and they will be on their way to you for the cost of shipping.....
>
> John H. Hasty
> Attorney At Law
> Guthrie, Davis, Henderson & Staton, P.L.L.C.
> 719 East Boulevard
> Charlotte, North Carolina 28203-5113
> Tele: (704) 372-5600
> Fax: (704) 372-4601
> E-mail: jhhasty@gdhs.com
> www.gdhs.com
>
> PRIVILEGE AND CONFIDENTIALITY NOTICE: This message (and any attachments)
is
> intended only for the use of the addressee and may contain information that
> is PRIVILEGED and CONFIDENTIAL, and/or may contain ATTORNEY WORK PRODUCT.
> If you are not the intended recipient, you are hereby notified that any
> dissemination of this communication is strictly prohibited. If you have
> received this communication in error, please erase all copies of the
message
> and its attachments and notify us immediately. Thank you.
>
> IRS CIRCULAR 230 NOTICE: In order to comply with certain IRS regulations
> regarding tax advice, we inform you that, unless expressly stated
otherwise,
> any tax advice contained in this communication (including any attachments)
> is not intended or written to be used, and cannot be used, for purposes of
> (i) avoiding penalties under the Internal Revenue Code or (ii) promoting,
> marketing or recommending to another party any transaction or matter
> addressed herein.
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/dlhogye@comcast.net
>
> [demime 1.01d removed an attachment of type image/jpeg which had a name of
photo headers 2.JPG]
>
> [demime 1.01d removed an attachment of type image/jpeg which had a name of
photo headers 3.JPG]
>
> [demime 1.01d removed an attachment of type image/jpeg which had a name of
photo headers.JPG]
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/rkramer3@austin.rr.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|