Re: [Fot] Clutch suggestions?

[Duncan Charlton <duncan.charlton54@gmail.com>]

Hi Scott,

The pressure plate springs can lose tension over time.  The situation with our
'71 Morgan Plus 8 was similar to yours -- an unknown vintage pressure plate
with a fairly new friction plate, but I was getting noticeable clutch slip in
3rd gear, even though the engine was worn and wheezy at the time.

Duncan
(Texas)
1952 Morgan Plus 4 #6 red


On Apr 18, 2012, at 8:06 AM, Barr, Scott wrote:

> Since we built my Spitfire in 2003, I've been using the stock clutch and
> pressure plate.  Late last season, Mr. Barker did a head for me.   Since
> then, I've had a little clutch slip.  This is a pretty new clutch plate,
> but the pressure plate is of unknown age - has worked fine to date, but
> everything wears out eventually, right?
>
>
>
> Any thoughts on the cause?  Is it likely the increased torque/HP is just
> overpowering the clutch?  The new motor should be putting out something
> like 110-115HP, based on Mr. Barker's estimate.  Is that beyond what the
> stock clutch can handle?
>
>
>
> Options: (1) buy a new stock pressure plate and clutch disk and see how
> it goes; (2) upgrade to some sort of competition clutch; or (3) get used
> to that nasty clutch smell.  Other options I'm not considering?
>
>
>
> I'd like to stay as close to stock as possible if I need to upgrade.
>
>
>
> Any thoughts on upgrade options?
>
>
>
> Scott B.
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: 
http://autox.team.net/mailman/options/fot/fot-archive@autox.team.net