Mike,
If you are turning one wheel you will need to multiply the driveshaft turns
by two to get the diff ratio. 2.05 turns of the driveshaft would equal a
4.1 diff ratio. To get more accurate you can turn one wheel 10 turns then
divide the driveshaft turns by 5.
Richard Good
--------------------------------------------------
From: "MIKE DEWEERD" <deweerdm@rogers.com>
Sent: Wednesday, August 17, 2011 4:35 AM
To: <fot@autox.team.net>
Subject: [Fot] Gear ratios
> Amici
> I have a TR4A rear end here that seems to spin in the 2-1 range?? When one
> wheel is held and the driveshaft is turned 2 times the wheel has made 1
> full
> turn.Going to pull the cover off tonight to look further into this.I don't
> know of a ratio this low........any one??? it's a later model...guessing
> 1967.(parts car)ThanksMike Deweerd TR4 #77
> _______________________________________________
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|