Wow. You guys are very scientific. I usually vent my crankcases with a
connecting ros
On Wed, Oct 6, 2010 at 10:55 AM, <toodamnfunky@comcast.net> wrote:
> I vent from the fuel pump blanking plate and the valve cover with -8 lines.
>
>
>
> jim g
>
>
>
>
> ----- Original Message -----
> From: "Mark Pendergrass" <mpendy@dishmail.net>
> To: "friends of triumph" <fot@autox.team.net>
> Sent: Wednesday, October 6, 2010 8:22:15 AM
> Subject: [Fot] block venting
>
> Family, earlier post made mention of venting the block. Seem to have alot
> of
> pressure build-up even to the point of haveing to wrap a shop towel around
> the
> rocker cover filler cap prior to getting on track. i have a finned aluminum
> cover with a pretty small vent hose. Would it help to weld a larger bung on
> cover to accept a bigger vent hose....this is driving me nuts!!! The usual
> venting stuff we do has been done.........i think! B B Thanks in advance B
> Mark
> Pendy B TR4#65
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/fot/toodamnfunky@comcast.net
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/bownes@web9.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|