Hi, I'm using studs gotten from Jegs; Summit and most other places sell
basically the same thing.
They're about 2 3/4 inches long. The hubs need to have the holes enlarged
and the studs pressed in. Easy job. I have the reamers if you need to borrow
them. My machinest says ream, don't drill. If you don't have a press, use
the BFH.
I use my Panasport lug nuts that at one time were acorn style (closed
end). I chucked them up in my lathe, drilled clear through, them tapped the
newly drilled section so they will screw onto the longer studs.
All this is pretty easy with the hubs disassembled.
Hope this helps.
Bill ----- Original Message -----
From: "Walter Hollowell" <walt@hot-tr6.com>
To: <fot@autox.team.net>
Sent: Saturday, October 02, 2010 1:34 PM
Subject: [Fot] wheel studs TR6
> On my TR6 racecar I am using 6mm wheel spacers on the front with 15X6
> Panasport wheels. I am concerned that the stock wheel studs don't reach
far
> enough
> into the wheel nuts. Do any FOT members have any ideas about a source of
> longer studs and optional wheel nuts for this application.
> Thanks
> Walt Hollowell
> Abq., NM
>
> _____
>
> I am using the Free version of SPAMfighter
<http://www.spamfighter.com/len>
> .
> SPAMfighter has removed 112498 of my spam emails to date.
>
> Do you have a slow PC?
<http://www.spamfighter.com/SLOW-PCfighter?cid=sigen>
> Try free scan!
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
http://autox.team.net/mailman/options/fot/william.tobin3@verizon.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|