I think the zddp zinc additive is heavier and wud drop to bottom when not
hot and being used..but i'm not an oil chemist
In a message dated 9/18/2010 11:06:50 A.M. Eastern Daylight Time,
mpendy@dishmail.net writes:
Family, the last two times i have had the oil pan off for bearing
inspection,
the bottom , say 1/2 to 1 pint , of oil seems to be more of a slurry, like
syrup instead of oil. The first time i thought the residue was the
remnants of
the rebuild,ie assembly lube, break-in wear and so on. I have removed all
bearing caps both times looking for anything unusual and i am getting good
wear patterns. The second removeval did not seem to yield as much slurry as
the first time. The engine is very fresh with virtually no hours on it. I
have
Valvoline VR1 20-50 this time in it with a bottle of comp cams zdddp.
Normal
or should i start freaking- out. Any input ??.......Thanks in
advance......Mark Pendy
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/rek46@aol.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|