Thank you Jim for the information.
Quite thick as this thick gasket would need some further grinding of the
head to achieve the compression ratio.
Seems that I have to stay with the normal steel head gaskets.
Cheers
Chris
Von: J.C. Hassall [mailto:jhassall@blacksburg.net]
Gesendet: Samstag, 7. August 2010 22:01
An: MadMarx
Cc: 'Joe Boruch'; fot@autox.team.net
Betreff: Re: [Fot] Cometic TR3 head gasket
On 8/7/2010 11:11 AM, J.C. Hassall wrote:
On 8/6/2010 8:00 AM, MadMarx wrote:
What material is the gasket made from?
Chris
Chris, I don't have my build log handy and don't remember the material.
The Cometic part number is H0793SP4043F. Hoefentlich dass ist Hilfe.
jim
Chris, the material is 0.043" thick, a composite of metal (steel?) between
two layers of some polymer.
jim
--
Jim Hassall
Blacksburg VA
'63 TR4 in autox preparation
99% finished, 90% to go
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|