Now that you mention his name it jarred my memory. I installed one of his
thrust washers very successfully in a GT6 race motor.
Bob
---- Glenn Franco <gaf3@charter.net> wrote:
> Thanks Bob
> I was not aware of Scot Helms work on these thrust washers. Just visited
> his site.
> Looks like a good alternative to the stock arrangement.
>
> What surprised me is that this engine only has about 40k miles on it.
>
> I also like the idea of a full circle thrust washer that Geoff Bryne has
> recommended.
>
> I need to inspect the area on the block and cap more closely.
>
> Glenn
>
> Bob Danielson wrote:
> > Did you order from Scott Helms (http://www.customthrustwashers.com/)
> > Most of the 6-Pack Forum guys have moved to Scott's solid alloy thrust
> > washers. Even if you don't buy from him, his site is an excellent
> > resource on all things "thrust washer"
> >
> > Bob
> >
> > Bob Danielson
> > 1975 TR6 CF38503U
> > Running w/ Throttle Body Injection,
> > Toyota 5 speed & Nissan LSD
> > http://tr6.danielsonfamily.org
> > --------------------------------------------------
> > From: "Glenn Franco" <gaf3@charter.net>
> > Sent: Thursday, May 06, 2010 5:13 PM
> > To: "Friends of Triumph" <fot@autox.team.net>; <6pack@autox.team.net>
> > Subject: [6pack] Dreaded Thrust Washers in the Oil Pan
> >
> >> Group
> >> I've been working on a friends 74 TR6 and we discovered lots of crank
> >> end play.
> >> I checked the end play because he was complaining of hard shifts or
> >> grinding while putting the trans in reverse.
> >> I removed the pan and found the thrust washers in the oil pan..
> >> I've run into large end play issues with the TR6's but this is the
> >> first I've seen in the pan.
> >>
> >> Understanding that this is a common malady with the TR6, I ordered a
> >> few sets of oversize thrust washers.
> >> Don't think there is enough material in a .025" oversize bearing to
> >> fix the problem.
> >>
> >> I pulled the bearing cap and didn't see major wear in the thrust face
> >> of the crank. I will need to do a closer inspection of the block
> >>
> >> Anyone out there seen a reasonable/simple fix for this problem?
> >>
> >> Thanks in advance
> >> Glenn Franco
> >> TR6's, 250 and Spit racer
> >> _______________________________________________
> >>
> >> 6pack@autox.team.net
> >> Donate: http://www.team.net/donate.html
> >> Archive: http://www.team.net/archive
> >> Forums: http://www.team.net/forums
> >> Unsubscribe/Manage:
> >> http://autox.team.net/mailman/options/6pack/75tr6@tr6.danielsonfamily.org
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/rdavis4@cfl.rr.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|