Hey Friends,
How important is it to upgrade to the gt6 spindles? I have a friend
who twists the snot out of his 1300 spit autocrosding and he has stock
spit spindles. I plan on putting my spit on the track and was
wondering. I know it is an easy upgrade, but do I need yo do it right
away?
Thanks
Chris
Sent from my IPhone
On May 4, 2010, at 10:47 PM, "Mark Pendergrass" <mpendy@dishmail.net>
wrote:
> Copper ' crush ' washers have always worked for me. MPendy
> ----- Original Message ----- From: "Greg & Alison Blake"
><ablake2@austin.rr.com
> >
> To: <fot@autox.team.net>
> Sent: Tuesday, May 04, 2010 4:38 PM
> Subject: [Fot] TR3/4 filter head relief valve
>
>
>> I am trying to solve the little seeps I have around the filter
>> head. Has
>> anyone used an o-ring under a washer to seal the pressure relief
>> valve
>> adjusting screw lock nut? I thought I would give this a try but
>> the o-rings
>> available at the local autoparts store seems to be too thick and
>> stand proud
>> of the chamfer that used to be sealed by a lead wire.
>>
>>
>>
>> What have you guys used?
>>
>>
>>
>> Thanks,
>>
>>
>>
>> Greg
>> _______________________________________________
>> fot@autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe: http://autox.team.net/mailman/options/fot/mpendy@dishmail.net
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/seacubeco@aol.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|