Be interesting to know how much torque this would hold on a repaired stud.
Tim
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of Justin Wagner
Sent: Sunday, April 25, 2010 9:57 PM
To: M&M Hado
Cc: fot@autox.team.net
Subject: Re: [Fot] TR4A Stripped Threads in Block
I have no opinion on this and no experience with this product... but I
thought I'd throw it in the mix for discussion.... Follow link...
--Justin
http://tds.loctite.com/tds5/docs/FORMSTRK-EN.PDF
M&M Hado wrote:
>A friend just stripped one of the long cylinder head stud threads in the
>deep hole when the torque got to 90 ft-lb. It was hard seeing a grown man
>cry. My first thought is that the block is toast. I'm sure he's not the
>first so are there any suggestions for a fix? It's a street TR4A.
>
>Mike
>_______________________________________________
>fot@autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe:
http://autox.team.net/mailman/options/fot/jmwagner@greenheart.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/timmurph@fastbytes.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|