That's funny because I do the same thing with the jack or a stack of 4x4's
that are laying around. The kicker is most likely there will be no warning
----- Original Message -----
From: "Justin Wagner" <jmwagner@greenheart.com>
To: "RACER BUD" <budscars@comcast.net>
Cc: "Rob" <19to1tr6@comcast.net>; <fot@autox.team.net>
Sent: Tuesday, April 06, 2010 9:15 PM
Subject: Re: [Fot] jack stands
> I'd trust those stands over a hell of a lot of the other stands and
> odd-non-stand-objects I have used over the years to secure a car.
> Besides, I've always made it a habit of putting other items under the car
> to support it if a stand failed... i.e. a floor jack (jacked up just shy
> of the frame)... big ol' tires and rims from a 4x4... etc. etc.
>
> And I've always made a habit of giving a car on stands a good little
> hand-made california tremor... as a test... before I put my body under it.
>
> In all these years, the only jack-stand screw up I've ever had... was...
> at 16... lowering my just-garage-painted-and-restored TR4A all the way to
> the ground just as I noticed that when I had pulled out the jackstands, I
> had accidentally left one perfectly centered and directly under the front
> valance.
>
> I never repaired that valance. One really couldn't see the crumple zone
> behind the front license place. (I wonder if whoever owns that car now
> ever fixed it?)
>
> On my current TR4A, that I bought in the 90's, the front valance was
> damaged and I replaced it with a TR250 valance so that I would get similar
> extra cooling from the vent that the earlier car's crumple zone provided.
> : )
>
>
> --Justin
>
>
>
> RACER BUD wrote:
>
>> find out if they are made in China..no sarcasm intended here...I just
>> don't want to get under a car that is supported by a product made in a
>> country that we know sends us bad stuff(lead in toys, etc)....Racer
>> Bud..Spitfire #21
>> ----- Original Message ----- From: "Rob" <19to1tr6@comcast.net>
>> To: <fot@autox.team.net>
>> Sent: Tuesday, April 06, 2010 4:49 PM
>> Subject: [Fot] jack stands
>>
>>
>>> I am wondering what members think about Harbor freights Aluminum Jack
>>> stands
>>> They weigh 3lbs and will support 1.5 ton. I like the idea of hauling
>>> less
>>> weight to the track the van is usually over wght. as it is Anyone using
>>> these
>>> stands ? thanks rob
>>>
>>> _______________________________________________
>>> fot@autox.team.net
>>> Donate: http://www.team.net/donate.html
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>> Unsubscribe:
>>> http://autox.team.net/mailman/options/fot/budscars@comcast.net
>>
>>
>> _______________________________________________
>> fot@autox.team.net
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe:
>> http://autox.team.net/mailman/options/fot/jmwagner@greenheart.com
_______________________________________________
fot@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|