fot
[Top] [All Lists]

Re: [Fot] Spitfire Bellhousings

To: robertten1@aol.com, fot@autox.team.net
Subject: Re: [Fot] Spitfire Bellhousings
From: herald948@aol.com
Date: Fri, 15 Jan 2010 09:16:39 EST
In a message dated 1/14/2010 11:40:11 P.M. Eastern Standard Time,  
robertten1@aol.com writes:

They are  available from Canley Classics.  Just a note DON'T use the  
thinner
version, they crack and break easily under race  conditions.
 
==AM==
Right! There are at least two versions. The one with fewer "ribs" and a  
very thin flange was used on the 948 and some early 1200 Heralds. The one with 
 more "ribs" and a thicker flange appeared on some early Spitfire 4 models; 
 I'm not sure how long it was used on the Spitfire, but I suspect it was 
largely  replaced by the cast iron version by the mid-1960s.
 
I've at least one of each, not counting what's on various cars I have  
about the place. They do take a fair bit of abuse...to a point (I've got one  
with a tiny hole or two resulting from the self-destruction of a pressure 
plate  in my Herald).  

--Andy  Mace

*Mrs Irrelevant: Oh, is it a jet?
*Man: Well, no ... It's not so  much of a jet, it's more your, er, Triumph 
Herald engine with wings.
--  Cut-price Airlines Sketch, Monty Python's Flying Circus (22)

Triumph 10 /  Herald / Sports 6 vehicle consultant, The Vintage Triumph 
Register: _http://www.vtr.org_ (http://www.vtr.org/) 

Check out the North  American Triumph Sports 6 (Vitesse 6) and Triumph 
Herald Database: _http://triumph-herald.us_ (http://triumph-herald.us/) 
_______________________________________________

Support Team.Net http://www.team.net/donate.html

Suggested annual donation $12.96


http://www.fot-racing.com


Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

Brought to you by Team.Net consulting - Unix software specialist.

<Prev in Thread] Current Thread [Next in Thread>