We use NGK BPR7HS gapped at 0.025 or about 0.65mm.
Tim
1961 TR4 #317
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of Mike Mehl
Sent: Saturday, November 21, 2009 6:56 PM
To: Triumph Friends of
Subject: [Fot] spark plug help
The TR4 is coming along. The engine is back in the car. The roll cage is
done. The fuel cell is plumbed in. The distributor is back from Jeff at
Advanced Distributor. The compression is 11.27 to 1.
What plugs should I
use? What gap with those plugs?
Thanks!!!!
Mike Mehl
You are subscribed as timmurph@fastbytes.com
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
You are subscribed as timmurph@fastbytes.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
|