Bob
I have broken a cam and also heard of this with others - identified cause
was an out of tolerance bearing, we believe a duff batch made for the major
'Specialist' here in the UK.
Similarly out of tolerance bearing caused rapid failure of cam on road car
of TR Register member here in the UK - again cause confirmed to be forward
bearing badly manufactured and allowing the cam to move up to 1/4 inch.
Hope this assists you.
Tony
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|