Price depends on condition $100 to $500, they all need to be worked on and
none have all the pieces.
Get as many pieces as you can i.e.: 3 good throttle bodies that have the
linkage complete and decent throttle shafts (I believe someone sells the
throttle shafts for about $200), 6 injectors with corresponding tubes, 1
control unit (these can be rebuilt for about $600) metering unit (make sure
you get the proper fittings on the mu) and pedestal complete with
distributor drive gear, Lucas fuel pump and pressure relief valve, fuel
filter, air plenum, air filter housing
This should be about all the parts you need. These are available quite
often at various prices.
Charly Mitchel
TR6 #44 with PI
----- Original Message -----
From: "riverside" <riverside@southslope.net>
To: <fot@autox.team.net>
Sent: Monday, September 21, 2009 2:41 PM
Subject: [Fot] PI
> got a chance at a TR6 PI setup.
> any ideas of what constitutes a good
> price and pitfalls i should watch for?
>
> art de armond
>
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> You are subscribed as charly@mitchelplumbing.com
>
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|