Jim: I use solder. I make a ring the same diameter as the screw out of a piece
of solder. When you tighten it down it seals great!
-Ed-
--- On Fri, 7/24/09, J.C. Hassall <jhassall@blacksburg.net> wrote:
From: J.C. Hassall <jhassall@blacksburg.net>
Subject: [Fot] TR4 oil system lead washer
To: fot@autox.team.net
Date: Friday, July 24, 2009, 9:14 PM
The lead washer which seals the oil pressure relief screw in the filter head
is NLA. What are folks using as an effective replacement?
tia
jim
--
J.C. Hassall
Blacksburg VA
'63 TR4 in autox preparation
98.9% finished, 90% to go _______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|