Steve,
Is this a TR3/4 motor?
What rods are you using?
Thanks!
Henry Frye - Sent via Phone
860.508.3118
-----Original Message-----
From: steve <colordog.1@earthlink.net>
Sent: Tuesday, April 28, 2009 2:09 PM
To: Henry Frye <henry@henryfrye.com>; fot@autox.team.net <fot@autox.team.net>
Subject: Re: [Fot] Isihara-Johnson crank scraper - windage tray screen for
TR4
I have run four race weekends with my IJ scraper / tray / Teflon setup. So
far no problems. I am curious to inspect everything but I have no plans to
pull the pan for now.
~Steve
-----Original Message-----
>From: Henry Frye <henry@henryfrye.com>
>Sent: Apr 28, 2009 5:10 AM
>To: fot@autox.team.net
>Subject: [Fot] Isihara-Johnson crank scraper - windage tray screen for TR4
>
>Racers,
>
>I am interested in sharing experiences with anyone who bought and has
>run one of the Isihara-Johnson crank scraper - windage tray screen
>combos for a TR3/4 engine with non-stock rods. I ran mine in my
>ill-fated VIR engine build, and while I do not think it caused my
>failure I do have concerns...
>_______________________________________________
>Support Team.Net http://www.team.net/donate.html
>
>http://www.fot-racing.com
>
>Fot mailing list
>Fot@autox.team.net
>http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|