Hi, Pegasus has a good supply of adapter fittings. I'm looking at a
similar situation.
Bill----- Original Message -----
From: "George Harmuth" <harmug@us.ibm.com>
To: <fot@autox.team.net>
Sent: Monday, April 06, 2009 2:12 PM
Subject: [Fot] Clutch master cylinder to AN adaptor
> I'm replacing the clutch master cylinder in my Spitfire and I need an
> adaptor so I can use the existing #4 AN hose. The current adaptor looks
> like it was kind of forced into the hole, the threads are all boogered
up.
> I'd like to do it right but I can't find a 3/16 brake line to #4 AN
> adaptor. I could drill out the hole and make it a standard NPT size
which I
> can get an adaptor for but I'd prefer to adapt it so I can carry a
standard
> master as a spare. Does anyone have a part number or a source for this?
> Any other ideas?
>
> thanks
> mike
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|