Hi,
don't forget to buy a new circlip for each installing. Never install a
circlip twice, even not for measuring the endfloat. Use the old ring for
measuring the endfloat.
Cheers
Chris
-----Urspr|ngliche Nachricht-----
Von: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] Im
Auftrag von Robert Lang
Gesendet: Dienstag, 17. Mdrz 2009 23:29
An: fot@autox.team.net
Betreff: [Fot] Stupid Tranny Question
Hi,
I broke the washer that goes between the circlip from hell and the third
gear bushing on my TR6 gearbox. Don't ask. Suffice to say "stupid". At any
rate, the folks at Moss had new ones in stock. So I purchased one and it
looks like the proper part.
Unfortunately, the part is about .010 too thick and I cannot install the
circlip from hell to hold things together. I'm talking .000 end-float
between the 2nd/3rd bushings and the circlip will not seat.
Undaunted, I decided to see if I can "fix" the fitment, as the washer
(this is the one with the flutes cut in so it does not spin against the
circlip) had a rough grey-ish finish and all the trannies I've ever taken
apart have a smooth shiny finish to this part. Using some cutting oil and
some emery paper, I've managed to polish off about .005" from the part to
this point. I've also managed to consume about an hour polishing and I
still have a guestimate that another .005" needs to come off the part
before it'll install and give me .003" min. end-float.
My question to the group: does this seem like a proper approach to the
problem? I suppose I could pull parts from another tranny, but I've got
only one spare and I'll need to address the broken washer at some point
anyway, so I'd like to make do with what I have in hand.
Note: this is a $50 part (new), not a $10 spacer washer.
Just curious.
rml
---------------------------------------------------------------------------
Bob Lang NER/SCCA | This space for rent
Solo Chair 2008 TR6 40 F Prepared | Triumph!
Voice:781-438-2568 FAX: 617-258-9535 | Cell: 339-927-4489
---------------------------------------------------------------------------
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|